歡迎光臨
每天分享高質量文章
當前位置：知識星球 > 後端 > 正文

如何在 Linux 上使用 tcpdump 命令捕獲和分析資料包 | Linux 中國

2018-09-26 分類：後端 閱讀(297) 評論(0)

tcpdump 是一個有名的命令列資料包分析工具。我們可以使用 tcpdump 命令捕獲實時 TCP/IP 資料包
— Pradeep Kumar


致謝
編譯自　|　
https://www.linuxtechi.com/capture-analyze-packets-tcpdump-command-linux/ 
　作者　|　Pradeep Kumar
　譯者　|　ypingcn ???共計翻譯：13.0 篇 貢獻時間：653 天

tcpdump 是一個有名的命令列資料包分析工具。我們可以使用 tcpdump 命令捕獲實時 TCP/IP 資料包，這些資料包也可以儲存到檔案中。之後這些捕獲的資料包可以透過 tcpdump命令進行分析。tcpdump 命令在網路層面進行故障排除時變得非常方便。

tcpdump 在大多數 Linux 發行版中都能用，對於基於 Debian 的Linux，可以使用 apt 命令安裝它。

  1. # apt install tcpdump -y

在基於 RPM 的 Linux 作業系統上，可以使用下麵的 yum 命令安裝 tcpdump。

  1. # yum install tcpdump -y

當我們在沒用任何選項的情況下執行 tcpdump 命令時，它將捕獲所有介面的資料包。因此，要停止或取消 tcpdump 命令，請鍵入 ctrl+c。在本教程中，我們將使用不同的實體來討論如何捕獲和分析資料包。

示例：1）從特定介面捕獲資料包

當我們在沒用任何選項的情況下執行 tcpdump 命令時，它將捕獲所有介面上的資料包，因此，要從特定介面捕獲資料包，請使用選項 -i，後跟介面名稱。

語法：

  1. # tcpdump -i {介面名}

假設我想從介面 enp0s3 捕獲資料包。

輸出將如下所示，

  1. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
  2. listening on enp0s3, link-type EN10MB (Ethernet), capture size 262144 bytes
  3. 06:43:22.905890 IP compute-0-1.example.com.ssh > 169.144.0.1.39374: Flags [P.], seq 21952160:21952540, ack 13537, win 291, options [nop,nop,TS val 26164373 ecr 6580205], length 380
  4. 06:43:22.906045 IP compute-0-1.example.com.ssh > 169.144.0.1.39374: Flags [P.], seq 21952540:21952760, ack 13537, win 291, options [nop,nop,TS val 26164373 ecr 6580205], length 220
  5. 06:43:22.906150 IP compute-0-1.example.com.ssh > 169.144.0.1.39374: Flags [P.], seq 21952760:21952980, ack 13537, win 291, options [nop,nop,TS val 26164373 ecr 6580205], length 220
  6. 06:43:22.906291 IP 169.144.0.1.39374 > compute-0-1.example.com.ssh: Flags [.], ack 21952980, win 13094, options [nop,nop,TS val 6580205 ecr 26164373], length 0
  7. 06:43:22.906303 IP 169.144.0.1.39374 > compute-0-1.example.com.ssh: Flags [P.], seq 13537:13609, ack 21952980, win 13094, options [nop,nop,TS val 6580205 ecr 26164373], length 72
  8. 06:43:22.906322 IP compute-0-1.example.com.ssh > 169.144.0.1.39374: Flags [P.], seq 21952980:21953200, ack 13537, win 291, options [nop,nop,TS val 26164373 ecr 6580205], length 220
  9. ^C
  10. 109930 packets captured
  11. 110065 packets received by filter
  12. 133 packets dropped by kernel
  13. [[email protected] ~]#

示例：2）從特定介面捕獲特定數量資料包

假設我們想從特定介面（如 enp0s3）捕獲 12 個資料包，這可以使用選項 -c {數量} -I {介面名稱} 輕鬆實現。

  1. root@compute-0-1 ~]# tcpdump -c 12 -i enp0s3

上面的命令將生成如下所示的輸出，

N-Number-Packsets-tcpdump-interface

示例：3）顯示 tcpdump 的所有可用介面

使用 -D 選項顯示 tcpdump 命令的所有可用介面，

  1. [root@compute-0-1 ~]# tcpdump -D
  2. 1.enp0s3
  3. 2.enp0s8
  4. 3.ovs-system
  5. 4.br-int
  6. 5.br-tun
  7. 6.nflog (Linux netfilter log (NFLOG) interface)
  8. 7.nfqueue (Linux netfilter queue (NFQUEUE) interface)
  9. 8.usbmon1 (USB bus number 1)
  10. 9.usbmon2 (USB bus number 2)
  11. 10.qbra692e993-28
  12. 11.qvoa692e993-28
  13. 12.qvba692e993-28
  14. 13.tapa692e993-28
  15. 14.vxlan_sys_4789
  16. 15.any (Pseudo-device that captures on all interfaces)
  17. 16.lo [Loopback]
  18. [[email protected] ~]#

我正在我的一個 openstack 計算節點上執行 tcpdump 命令，這就是為什麼在輸出中你會看到數字介面、標簽介面、網橋和 vxlan 介面

示例：4）捕獲帶有可讀時間戳的資料包（-tttt 選項）

預設情況下，在 tcpdump 命令輸出中，不顯示可讀性好的時間戳，如果您想將可讀性好的時間戳與每個捕獲的資料包相關聯，那麼使用 -tttt 選項，示例如下所示，

  1. [[email protected] ~]# tcpdump -c 8 -tttt -i enp0s3
  2. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
  3. listening on enp0s3, link-type EN10MB (Ethernet), capture size 262144 bytes
  4. 2018-08-25 23:23:36.954883 IP compute-0-1.example.com.ssh > 169.144.0.1.39406: Flags [P.], seq 1449206247:1449206435, ack 3062020950, win 291, options [nop,nop,TS val 86178422 ecr 21583714], length 188
  5. 2018-08-25 23:23:36.955046 IP 169.144.0.1.39406 > compute-0-1.example.com.ssh: Flags [.], ack 188, win 13585, options [nop,nop,TS val 21583717 ecr 86178422], length 0
  6. 2018-08-25 23:23:37.140097 IP controller0.example.com.amqp > compute-0-1.example.com.57818: Flags [P.], seq 814607956:814607964, ack 2387094506, win 252, options [nop,nop,TS val 86172228 ecr 86176695], length 8
  7. 2018-08-25 23:23:37.140175 IP compute-0-1.example.com.57818 > controller0.example.com.amqp: Flags [.], ack 8, win 237, options [nop,nop,TS val 86178607 ecr 86172228], length 0
  8. 2018-08-25 23:23:37.355238 IP compute-0-1.example.com.57836 > controller0.example.com.amqp: Flags [P.], seq 1080415080:1080417400, ack 1690909362, win 237, options [nop,nop,TS val 86178822 ecr 86163054], length 2320
  9. 2018-08-25 23:23:37.357119 IP controller0.example.com.amqp > compute-0-1.example.com.57836: Flags [.], ack 2320, win 1432, options [nop,nop,TS val 86172448 ecr 86178822], length 0
  10. 2018-08-25 23:23:37.357545 IP controller0.example.com.amqp > compute-0-1.example.com.57836: Flags [P.], seq 1:22, ack 2320, win 1432, options [nop,nop,TS val 86172449 ecr 86178822], length 21
  11. 2018-08-25 23:23:37.357572 IP compute-0-1.example.com.57836 > controller0.example.com.amqp: Flags [.], ack 22, win 237, options [nop,nop,TS val 86178825 ecr 86172449], length 0
  12. 8 packets captured
  13. 134 packets received by filter
  14. 69 packets dropped by kernel
  15. [[email protected] ~]#

示例：5）捕獲資料包並將其儲存到檔案（-w 選項）

使用 tcpdump 命令中的 -w 選項將捕獲的 TCP/IP 資料包儲存到一個檔案中，以便我們可以在將來分析這些資料包以供進一步分析。

語法：

  1. # tcpdump -w 檔案名.pcap -i {介面名}

註意：檔案副檔名必須為 .pcap。

假設我要把 enp0s3 介面捕獲到的包儲存到檔案名為 enp0s3-26082018.pcap。

  1. [root@compute-0-1 ~]# tcpdump -w enp0s3-26082018.pcap -i enp0s3

上述命令將生成如下所示的輸出，

  1. [root@compute-0-1  ~]# tcpdump -w enp0s3-26082018.pcap -i enp0s3
  2. tcpdump: listening on enp0s3, link-type EN10MB (Ethernet), capture size 262144 bytes
  3. ^C841 packets captured
  4. 845 packets received by filter
  5. 0 packets dropped by kernel
  6. [root@compute-0-1  ~]# ls
  7. anaconda-ks.cfg enp0s3-26082018.pcap
  8. [root@compute-0-1  ~]#

捕獲並儲存大小大於 N 位元組的資料包。

  1. [root@compute-0-1  ~]# tcpdump -w enp0s3-26082018-2.pcap greater 1024

捕獲並儲存大小小於 N 位元組的資料包。

  1. [root@compute-0-1  ~]# tcpdump -w enp0s3-26082018-3.pcap less 1024

示例：6）從儲存的檔案中讀取資料包（-r 選項）

在上面的例子中，我們已經將捕獲的資料包儲存到檔案中，我們可以使用選項 -r 從檔案中讀取這些資料包，例子如下所示，

  1. [root@compute-0-1 ~]# tcpdump -r enp0s3-26082018.pcap

用可讀性高的時間戳讀取包內容，

  1. [root@compute-0-1  ~]# tcpdump -tttt -r enp0s3-26082018.pcap
  2. reading from file enp0s3-26082018.pcap, link-type EN10MB (Ethernet)
  3. 2018-08-25 22:03:17.249648 IP compute-0-1.example.com.ssh > 169.144.0.1.39406: Flags [P.], seq 1426167803:1426167927, ack 3061962134, win 291, options
  4. [nop,nop,TS val 81358717 ecr 20378789], length 124
  5. 2018-08-25 22:03:17.249840 IP 169.144.0.1.39406 > compute-0-1.example.com.ssh: Flags [.], ack 124, win 564, options [nop,nop,TS val 20378791 ecr 81358
  6. 717], length 0
  7. 2018-08-25 22:03:17.454559 IP controller0.example.com.amqp > compute-0-1.example.com.57836: Flags [.], ack 1079416895, win 1432, options [nop,nop,TS v
  8. al 81352560 ecr 81353913], length 0
  9. 2018-08-25 22:03:17.454642 IP compute-0-1.example.com.57836 > controller0.example.com.amqp: Flags [.], ack 1, win 237, options [nop,nop,TS val 8135892
  10. 2 ecr 81317504], length 0
  11. 2018-08-25 22:03:17.646945 IP compute-0-1.example.com.57788 > controller0.example.com.amqp: Flags [.], seq 106760587:106762035, ack 688390730, win 237
  12. , options [nop,nop,TS val 81359114 ecr 81350901], length 1448
  13. 2018-08-25 22:03:17.647043 IP compute-0-1.example.com.57788 > controller0.example.com.amqp: Flags [P.], seq 1448:1956, ack 1, win 237, options [nop,no
  14. p,TS val 81359114 ecr 81350901], length 508
  15. 2018-08-25 22:03:17.647502 IP controller0.example.com.amqp > compute-0-1.example.com.57788: Flags [.], ack 1956, win 1432, options [nop,nop,TS val 813
  16. 52753 ecr 81359114], length 0
  17. .........................................................................................................................

示例：7）僅捕獲特定介面上的 IP 地址資料包（-n 選項）

使用 tcpdump 命令中的 -n 選項，我們能只捕獲特定介面上的 IP 地址資料包，示例如下所示，

  1. [root@compute-0-1 ~]# tcpdump -n -i enp0s3

上述命令輸出如下，

  1. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
  2. listening on enp0s3, link-type EN10MB (Ethernet), capture size 262144 bytes
  3. 22:22:28.537904 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 1433301395:1433301583, ack 3061976250, win 291, options [nop,nop,TS val 82510005 ecr 20666610], length 188
  4. 22:22:28.538173 IP 169.144.0.1.39406 > 169.144.0.20.ssh: Flags [.], ack 188, win 9086, options [nop,nop,TS val 20666613 ecr 82510005], length 0
  5. 22:22:28.538573 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 188:552, ack 1, win 291, options [nop,nop,TS val 82510006 ecr 20666613], length 364
  6. 22:22:28.538736 IP 169.144.0.1.39406 > 169.144.0.20.ssh: Flags [.], ack 552, win 9086, options [nop,nop,TS val 20666613 ecr 82510006], length 0
  7. 22:22:28.538874 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 552:892, ack 1, win 291, options [nop,nop,TS val 82510006 ecr 20666613], length 340
  8. 22:22:28.539042 IP 169.144.0.1.39406 > 169.144.0.20.ssh: Flags [.], ack 892, win 9086, options [nop,nop,TS val 20666613 ecr 82510006], length 0
  9. 22:22:28.539178 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 892:1232, ack 1, win 291, options [nop,nop,TS val 82510006 ecr 20666613], length 340
  10. 22:22:28.539282 IP 169.144.0.1.39406 > 169.144.0.20.ssh: Flags [.], ack 1232, win 9086, options [nop,nop,TS val 20666614 ecr 82510006], length 0
  11. 22:22:28.539479 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 1232:1572, ack 1, win 291, options [nop,nop,TS val 82510006 ecr 20666614], length 340
  12. 22:22:28.539595 IP 169.144.0.1.39406 > 169.144.0.20.ssh: Flags [.], ack 1572, win 9086, options [nop,nop,TS val 20666614 ecr 82510006], length 0
  13. 22:22:28.539760 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 1572:1912, ack 1, win 291, options [nop,nop,TS val 82510007 ecr 20666614], length 340
  14. .........................................................................

您還可以使用 tcpdump 命令中的 -c 和 -N 選項捕獲 N 個 IP 地址包，

  1. [root@compute-0-1  ~]# tcpdump -c 25 -n -i enp0s3

示例：8）僅捕獲特定介面上的 TCP 資料包

在 tcpdump 命令中，我們能使用 tcp 選項來只捕獲 TCP 資料包，

  1. [root@compute-0-1  ~]# tcpdump -i enp0s3 tcp
  2. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
  3. listening on enp0s3, link-type EN10MB (Ethernet), capture size 262144 bytes
  4. 22:36:54.521053 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 1433336467:1433336655, ack 3061986618, win 291, options [nop,nop,TS val 83375988 ecr 20883106], length 188
  5. 22:36:54.521474 IP 169.144.0.1.39406 > 169.144.0.20.ssh: Flags [.], ack 188, win 9086, options [nop,nop,TS val 20883109 ecr 83375988], length 0
  6. 22:36:54.522214 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 188:552, ack 1, win 291, options [nop,nop,TS val 83375989 ecr 20883109], length 364
  7. 22:36:54.522508 IP 169.144.0.1.39406 > 169.144.0.20.ssh: Flags [.], ack 552, win 9086, options [nop,nop,TS val 20883109 ecr 83375989], length 0
  8. 22:36:54.522867 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 552:892, ack 1, win 291, options [nop,nop,TS val 83375990 ecr 20883109], length 340
  9. 22:36:54.523006 IP 169.144.0.1.39406 > 169.144.0.20.ssh: Flags [.], ack 892, win 9086, options [nop,nop,TS val 20883109 ecr 83375990], length 0
  10. 22:36:54.523304 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 892:1232, ack 1, win 291, options [nop,nop,TS val 83375990 ecr 20883109], length 340
  11. 22:36:54.523461 IP 169.144.0.1.39406 > 169.144.0.20.ssh: Flags [.], ack 1232, win 9086, options [nop,nop,TS val 20883110 ecr 83375990], length 0
  12. 22:36:54.523604 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 1232:1572, ack 1, win 291, options [nop,nop,TS val 83375991 ecr 20883110], length 340
  13. ...................................................................................................................................................

示例：9）從特定介面上的特定埠捕獲資料包

使用 tcpdump 命令，我們可以從特定介面 enp0s3 上的特定埠（例如 22）捕獲資料包。

語法：

  1. # tcpdump -i {interface-name} port {Port_Number}
  1. [root@compute-0-1  ~]# tcpdump -i enp0s3 port 22
  2. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
  3. listening on enp0s3, link-type EN10MB (Ethernet), capture size 262144 bytes
  4. 22:54:45.032412 IP compute-0-1.example.com.ssh > 169.144.0.1.39406: Flags [P.], seq 1435010787:1435010975, ack 3061993834, win 291, options [nop,nop,TS val 84446499 ecr 21150734], length 188
  5. 22:54:45.032631 IP 169.144.0.1.39406 > compute-0-1.example.com.ssh: Flags [.], ack 188, win 9131, options [nop,nop,TS val 21150737 ecr 84446499], length 0
  6. 22:54:55.037926 IP compute-0-1.example.com.ssh > 169.144.0.1.39406: Flags [P.], seq 188:576, ack 1, win 291, options [nop,nop,TS val 84456505 ecr 21150737], length 388
  7. 22:54:55.038106 IP 169.144.0.1.39406 > compute-0-1.example.com.ssh: Flags [.], ack 576, win 9154, options [nop,nop,TS val 21153238 ecr 84456505], length 0
  8. 22:54:55.038286 IP compute-0-1.example.com.ssh > 169.144.0.1.39406: Flags [P.], seq 576:940, ack 1, win 291, options [nop,nop,TS val 84456505 ecr 21153238], length 364
  9. 22:54:55.038564 IP 169.144.0.1.39406 > compute-0-1.example.com.ssh: Flags [.], ack 940, win 9177, options [nop,nop,TS val 21153238 ecr 84456505], length 0
  10. 22:54:55.038708 IP compute-0-1.example.com.ssh > 169.144.0.1.39406: Flags [P.], seq 940:1304, ack 1, win 291, options [nop,nop,TS val 84456506 ecr 21153238], length 364
  11. ............................................................................................................................

示例：10）在特定介面上捕獲來自特定來源 IP 的資料包

在 tcpdump 命令中，使用 src 關鍵字後跟 IP 地址，我們可以捕獲來自特定來源 IP 的資料包，

語法：

  1. # tcpdump -n -i {介面名} src {IP 地址}

例子如下，

  1. [root@compute-0-1  ~]# tcpdump -n -i enp0s3 src 169.144.0.10
  2. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
  3. listening on enp0s3, link-type EN10MB (Ethernet), capture size 262144 bytes
  4. 23:03:45.912733 IP 169.144.0.10.amqp > 169.144.0.20.57800: Flags [.], ack 526623844, win 243, options [nop,nop,TS val 84981008 ecr 84982372], length 0
  5. 23:03:46.136757 IP 169.144.0.10.amqp > 169.144.0.20.57796: Flags [.], ack 2535995970, win 252, options [nop,nop,TS val 84981232 ecr 84982596], length 0
  6. 23:03:46.153398 IP 169.144.0.10.amqp > 169.144.0.20.57798: Flags [.], ack 3623063621, win 243, options [nop,nop,TS val 84981248 ecr 84982612], length 0
  7. 23:03:46.361160 IP 169.144.0.10.amqp > 169.144.0.20.57802: Flags [.], ack 2140263945, win 252, options [nop,nop,TS val 84981456 ecr 84982821], length 0
  8. 23:03:46.376926 IP 169.144.0.10.amqp > 169.144.0.20.57808: Flags [.], ack 175946224, win 252, options [nop,nop,TS val 84981472 ecr 84982836], length 0
  9. 23:03:46.505242 IP 169.144.0.10.amqp > 169.144.0.20.57810: Flags [.], ack 1016089556, win 252, options [nop,nop,TS val 84981600 ecr 84982965], length 0
  10. 23:03:46.616994 IP 169.144.0.10.amqp > 169.144.0.20.57812: Flags [.], ack 832263835, win 252, options [nop,nop,TS val 84981712 ecr 84983076], length 0
  11. 23:03:46.809344 IP 169.144.0.10.amqp > 169.144.0.20.57814: Flags [.], ack 2781799939, win 252, options [nop,nop,TS val 84981904 ecr 84983268], length 0
  12. 23:03:46.809485 IP 169.144.0.10.amqp > 169.144.0.20.57816: Flags [.], ack 1662816815, win 252, options [nop,nop,TS val 84981904 ecr 84983268], length 0
  13. 23:03:47.033301 IP 169.144.0.10.amqp > 169.144.0.20.57818: Flags [.], ack 2387094362, win 252, options [nop,nop,TS val 84982128 ecr 84983492], length 0
  14. ^C
  15. 10 packets captured
  16. 12 packets received by filter
  17. 0 packets dropped by kernel

示例：11）在特定介面上捕獲來自特定目的 IP 的資料包

語法：

  1. # tcpdump -n -i {介面名} dst {IP 地址}
  1. [root@compute-0-1  ~]# tcpdump -n -i enp0s3 dst 169.144.0.1
  2. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
  3. listening on enp0s3, link-type EN10MB (Ethernet), capture size 262144 bytes
  4. 23:10:43.520967 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 1439564171:1439564359, ack 3062005550, win 291, options [nop,nop,TS val 85404988 ecr 21390356], length 188
  5. 23:10:43.521441 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 188:408, ack 1, win 291, options [nop,nop,TS val 85404988 ecr 21390359], length 220
  6. 23:10:43.521719 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 408:604, ack 1, win 291, options [nop,nop,TS val 85404989 ecr 21390359], length 196
  7. 23:10:43.521993 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 604:800, ack 1, win 291, options [nop,nop,TS val 85404989 ecr 21390359], length 196
  8. 23:10:43.522157 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 800:996, ack 1, win 291, options [nop,nop,TS val 85404989 ecr 21390359], length 196
  9. 23:10:43.522346 IP 169.144.0.20.ssh > 169.144.0.1.39406: Flags [P.], seq 996:1192, ack 1, win 291, options [nop,nop,TS val 85404989 ecr 21390359], length 196
  10. .........................................................................................

示例：12）捕獲兩臺主機之間的 TCP 資料包通訊

假設我想捕獲兩臺主機 169.144.0.1 和 169.144.0.20 之間的 TCP 資料包，示例如下所示，

  1. [root@compute-0-1  ~]# tcpdump -w two-host-tcp-comm.pcap -i enp0s3 tcp and \(host 169.144.0.1 or host 169.144.0.20\)

使用 tcpdump 命令只捕獲兩臺主機之間的 SSH 資料包流，

  1. [root@compute-0-1  ~]# tcpdump -w ssh-comm-two-hosts.pcap -i enp0s3 src 169.144.0.1 and port 22 and dst 169.144.0.20 and port 22

示例：13）捕獲兩臺主機之間（來回）的 UDP 網路資料包

語法：

  1. # tcpdump -w -s -i udp and \(host and host \)
  1. [root@compute-0-1  ~]# tcpdump -w two-host-comm.pcap -s 1000 -i enp0s3 udp and \(host 169.144.0.10 and host 169.144.0.20\)

示例：14）捕獲十六進位制和 ASCII 格式的資料包

使用 tcpdump 命令，我們可以以 ASCII 和十六進位制格式捕獲 TCP/IP 資料包，

要使用 -A 選項捕獲 ASCII 格式的資料包，示例如下所示:

  1. [root@compute-0-1  ~]# tcpdump -c 10 -A -i enp0s3
  2. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
  3. listening on enp0s3, link-type EN10MB (Ethernet), capture size 262144 bytes
  4. 00:37:10.520060 IP compute-0-1.example.com.ssh > 169.144.0.1.39406: Flags [P.], seq 1452637331:1452637519, ack 3062125586, win 333, options [nop,nop,TS val 90591987 ecr 22687106], length 188
  5. E...[root@compute-0-1 @...............V.|...T....MT......
  6. .fR..Z-....b.:..Z5...{.'p....]."}...Z..9.?......."root@compute-0-1 <.....v..c..... ....qb..5...n.....="">..
  7. 00:37:10.520319 IP 169.144.0.1.39406 > compute-0-1.example.com.ssh: Flags [.], ack 188, win 13930, options [nop,nop,TS val 22687109 ecr 90591987], length 0
  8. root@compute-0-1 @.|+..............T.V.}O..6j.d.....
  9. .Z-..fR.
  10. 00:37:11.687543 IP controller0.example.com.amqp > compute-0-1.example.com.57800: Flags [.], ack 526624548, win 243, options [nop,nop,TS val 90586768 ecr 90588146], length 0
  11. root@compute-0-1 @.!L...
  12. .....(..g....c.$...........
  13. .f>..fC.
  14. 00:37:11.687612 IP compute-0-1.example.com.57800 > controller0.example.com.amqp: Flags [.], ack 1, win 237, options [nop,nop,TS val 90593155 ecr 90551716], length 0
  15. root@compute-0-1 @..........
  16. ...(.c.$g.......Se.....
  17. .fW..e..
  18. ..................................................................................................................................................

要同時以十六進位制和 ASCII 格式捕獲資料包，請使用 -XX 選項。

  1. [root@compute-0-1  ~]# tcpdump -c 10 -XX -i enp0s3
  2. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
  3. listening on enp0s3, link-type EN10MB (Ethernet), capture size 262144 bytes
  4. 00:39:15.124363 IP compute-0-1.example.com.ssh > 169.144.0.1.39406: Flags [P.], seq 1452640859:1452641047, ack 3062126346, win 333, options [nop,nop,TS val 90716591 ecr 22718257], length 188
  5. 0x0000: 0a00 2700 0000 0800 27f4 f935 0800 4510 ..'.....'..5..E.
  6. 0x0010: 00f0 5bc6 4000 4006 8afc a990 0014 a990 ..[root@compute-0-1 @.........
  7. 0x0020: 0001 0016 99ee 5695 8a5b b684 570a 8018 ......V..[..W...
  8. 0x0030: 014d 5418 0000 0101 080a 0568 39af 015a .MT........h9..Z
  9. 0x0040: a731 adb7 58b6 1a0f 2006 df67 c9b6 4479 .1..X......g..Dy
  10. 0x0050: 19fd 2c3d 2042 3313 35b9 a160 fa87 d42c ..,=.B3.5..`...,
  11. 0x0060: 89a9 3d7d dfbf 980d 2596 4f2a 99ba c92a ..=}....%.O*...*
  12. 0x0070: 3e1e 7bf7 3af2 a5cc ee4f 10bc 7dfc 630d >.{.:....O..}.c.
  13. 0x0080: 898a 0e16 6825 56c7 b683 1de4 3526 ff04 ....h%V.....5&..
  14. 0x0090: 68d1 4f7d babd 27ba 84ae c5d3 750b 01bd h.O}..'.....u...
  15. 0x00a0: 9c43 e10a 33a6 8df2 a9f0 c052 c7ed 2ff5 .C..3......R../.
  16. 0x00b0: bfb1 ce84 edfc c141 6dad fa19 0702 62a7 .......Am.....b.
  17. 0x00c0: 306c db6b 2eea 824e eea5 acd7 f92e 6de3 0l.k...N......m.
  18. 0x00d0: 85d0 222d f8bf 9051 2c37 93c8 506d 5cb5 .."-...Q,7..Pm\.
  19. 0x00e0: 3b4a 2a80 d027 49f2 c996 d2d9 a9eb c1c4 ;J*..'I.........
  20. 0x00f0: 7719 c615 8486 d84c e42d 0ba3 698c w......L.-..i.
  21. 00:39:15.124648 IP 169.144.0.1.39406 > compute-0-1.example.com.ssh: Flags [.], ack 188, win 13971, options [nop,nop,TS val 22718260 ecr 90716591], length 0
  22. 0x0000: 0800 27f4 f935 0a00 2700 0000 0800 4510 ..'..5..'.....E.
  23. 0x0010: 0034 6b70 4000 4006 7c0e a990 0001 a990 root@compute-0-1 @.|.......
  24. 0x0020: 0014 99ee 0016 b684 570a 5695 8b17 8010 ........W.V.....
  25. 0x0030: 3693 7c0e 0000 0101 080a 015a a734 0568 6.|........Z.4.h
  26. 0x0040: 39af
  27. .......................................................................

這就是本文的全部內容，我希望您能瞭解如何使用 tcpdump 命令捕獲和分析 TCP/IP 資料包。請分享你的反饋和評論。

via: https://www.linuxtechi.com/capture-analyze-packets-tcpdump-command-linux/

作者：Pradeep Kumar[2]
選題：lujun9972
譯者：ypingcn
校對：wxy

本文由 LCTT 原創編譯，Linux中國 榮譽推出

贊(0)
標籤：

相關推薦

熱門標籤

iOS (11238)微軟 (4955)Linux (4274)安全 (4180)Python (4161)效能 (3165)運維 (2774)最佳化 (2419).NET (2262)Google (2136)機器學習 (1795)併發 (1613)分散式 (1559)叢集 (1240)SQL (1174)Mysql (1060)區塊鏈 (1017)Docker (977)微服務 (922)面試 (919)Apache (743)NLP (725)Redis (719)Android (668)Git (640)架構師 (632)Nginx (630)Facebook (599)JVM (595)爬蟲 (476)

熱門文章

分享創造快樂